After using the Foot Massager Shampoo Bed, in order to ensure its performance and extend its service life, it needs to be properly maintained. Here are some detailed maintenance steps:
Read the product manual:
The first step is to read the product manual carefully, which is the basis for understanding how to properly maintain the massager. The product manual usually provides specific suggestions on how to clean, maintain and store the massager.
Prepare cleaning tools:
Before cleaning, prepare the required cleaning tools, such as neutral detergent, dry cloth and clean water. Make sure that the detergent used is suitable for the material of the massager and will not cause damage to it.
Power off and disassembly:
Before performing any cleaning or maintenance work, make sure that the Foot Massager Shampoo Bed is turned off and unplug the power cord from the power outlet. This is to avoid electric shock and damage to the internal circuit of the massager.
Cleaning the shell and power cord:
Use a neutral detergent and a soft cloth to clean the plastic shell and power cord of the massager. This can remove dust, dirt and grease, keeping the appearance of the massager clean and hygienic. Note: Do not use corrosive solvents or wet cloth to clean the massager to avoid damaging its surface or internal circuits.
Fabric cleaning:
If the massager has fabrics (such as massage pads or covers), you can use diluted detergent and soft cloth to clean it. Note that the soft cloth must be wrung out until it is damp and dry, and no water can drip to prevent moisture from penetrating into the massager.
Circuit maintenance:
Although it is not recommended to clean the circuit part of the massager directly, you can use a dry soft cloth to gently wipe the circuit board and connectors to remove dust and dirt. Make sure that water or any liquid does not come into contact with the circuit part during cleaning.
Control cleaning and storage:
Use a dry soft cloth to clean the power switch and control buttons of the massager to ensure that it works properly. If the massager is not used for a long time, it is recommended to store it in a dry, ventilated and dust-free environment and cover it with a dust cover to prevent dust from entering the machine.
